The CL- Series Fiber Microscope utilizes a white LED for coaxial
illumination. Light is introduced into the optical path
(axis) so that it comes out the tip of the objective and strikes
the sample perpendicular to the fiber end-face. It produces
excellent detail of scratches and contamination. For critical
examination of polish quality, we strongly recommend the CL-Series
Power Requirements: 3 “AAA” alkaline batteries
LED: Rated life: 100,000 hrs.
Size: 225mm/8.76”L x 32mm/1.25” Diameter
Controls: Momentary on/off switch Fine-Focus control
Safety Filter: Built-in
Adapter interface: Uses interchangeable, presented universal or
Cat. No. Description
CL-200 200x Fiber Microscope with universal “slip-grip” adapter
Step 1.Input the Fiber which will be checked into the Fiber Insert
Entrance, insert another fiber connector into the light
Step 2.See from the Eyepiece and press on the on/off LED switch
Step 3.Adjust the focus control, just to find the clearest viewing;
All products from our company are warranted to be free of all
defects in material and workmanship for period of 12 months from
the date of delivery. The warranty does not apply to any instrument
which has become worn, defective, damaged or broken due to abuse ,
misuse, tampering, or unauthorized repairs. Under this warranty, We
will repair or replace, without
charge to the purchaser, any part of which upon our examination,
appears to be defective in materials or workmanship.
Laser Safety information:
Every our Fiber Scope is equipped with an attenuating, laser safety
filter to reduce the risk of accidental viewing of active
fiber emissions. Since many of the wavelengths of light used in the
fiber optic industry are invisible to the naked eye, the
natural aversion reflex to viewing bright light is suppressed
resulting in the potential for long periods of accidental exposure
which can lead to permanent damager.
The filter we install will provide over 35dBm of attenuation at
wavelengths from1310nm to 1550nm. In addition,it will provide over
20.5dBm of attenuation at 850nm. However, it should be stressed
that in spite of the protection offered, under no
circumstances should an actively emitting fiber be viewed with a
visual inspection scope such as the CL-200X.
How to choose between the OL-Series and the CL-Series?
Both our fiber microscopes provide excellent views of the ferrule
end face. We recommend 200x magnification for
multi-mode and 400x magnification for single-mode:
(1) If you frequently terminate fiber and have received
professional training, you are probably best served by our CL
(2) If you only occasionally terminate fiber, and are unsure, you
might consider the OL Series.